Do you have a 7w Jtech laser and are using Lightburn with it? This is a premade library of cutting speeds and power for various woods, plastics, and other materials. This setup works perfect for setup that include the Onefinity woodworker, journeyman, or machinist cnc, shapeoko 3 cnc, inventables xcarve cnc, and other hobby cnc machines and 3d printers. HOW TO INSTALL: Download the jtech7w_library.clb then open Lightburn then go to the 'library' tab in the bottom right near the 'laser' tab. then click 'load' Select the jtech7w_library.clb library file. Done. WILL NOT INSTALL IN THE TRIAL VERSIONS! 
16 Comments
Chris Lintz
10/18/2020 09:48:00 pm
Can't get it to download
Chris Lintz
10/20/2020 06:35:08 pm
The download link doesn't work
Alberto J. Dovalina
10/27/2020 08:44:25 am
link does not work
Yesenia A
11/14/2020 12:09:03 am
Hello, I'm not using lightburn but am looking for some settings so I can start experimenting. Would you have an excel file, screenshot, pdf? Thanks in advance.
Rachel
11/30/2020 11:01:28 am
I can not get link to work.
Cathy
1/25/2021 03:08:07 pm
Hey, I can get this file to download.
Rafael Balderrama
2/2/2021 03:15:33 pm
Hello....I cannot download the J Tech 7w Lightburn Library you offer on your website. Also, if you have any additional helpful info regardinf this laser and the Millright XL CNC I would appreciate it.
Jerry Trent
3/15/2021 07:25:17 pm
Right click and save as
Lee Turnbull
4/11/2021 08:16:49 am
It doesnt download as a usable format wven when you right click and save
Greg
4/21/2021 11:08:40 am
still does not download file offers save image as only or link????....Please help
Greg
4/21/2021 11:38:37 am
I hit link copied text into notepad +++ and saved it as .clb
Jeff
8/11/2021 08:44:01 pm
tried that, it still doesn't save correct format for light burn.
JAMES
9/18/2021 05:26:53 pm
Doesn't work 11/20/2021 01:42:39 pm
Hi, Thanks for providing this library but, the file does not show up from the lightburn import page. I think it is an unsupported format. Does anyone know how to get this library installed? Alternatively if you could post the cut settings I can put them into lightburn manually. 11/20/2021 01:49:08 pm
Eureka! I figured it out!!!
Aaron
2/25/2022 03:38:45 pm
I got it to load! Leave a Reply. |
Categories
All
“As an Amazon Associate I earn from qualifying purchases.”
Archives
November 2023
|
RSS Feed